redlion® C-Flange Adaptor, Series: ARCJ, For Use With: Magnetic Pickup Sensor, Cast Aluminium, 6.63 in Dia x 3.5 in L
- Easily installs to NEMA type "C" face motor frames
- Magnetic pickup versions for high-speed applications
- Magneto resistive sensor versions for zero or low speed applications
- Cast aluminum ring with 1/2 in NPT conduit junction box
- 8 to 30 VDC at 30 mA max, reverse polarity protected power supply
- 0 to 10 kHz operating frequency
- 3-wire, 22 AWG with stranded drain wire and 100% foil coverage, gray PVC jacket
- 10 lb (4.5 kg) for 1 min cable strain relief
- 5/8 in shaft diameter
- The ARCJ kits with this sensor option use the red Lion Controls MP-37CA magnetic pickup, this sensor does not require external power
- The magnetic pickup is factory installed in the ring to provide a nominal sensor/gear air gap of 0.007 in (0.18 mm) to 0.010 in (0.25 mm)
- This provides adequate output from the sensor for most applications
Standard/Approvals |
: |
RoHS Compliant |
Application |
: |
For convenient adaptation of sensors and sensing gears to gear case or foot-mounted NEMA C face motors |